Potential occupational standard
Occupational standard in development
Approved occupational standard
Occupational standard without apprenticeship
Custom occupational card
Apprenticeship
Higher Technical Qualification
T Level
Technical Qualification
Career starter apprenticeship
Royal apprenticeship
Occupational progression
Technical education progression
Mid green occupation
Dark green occupation
Favourite occupation
View glossary of terms
home Engineering and manufacturing
Gas network craftsperson - Network Maintenance Craftsperson (Electrical & Instrumentation)

Gas network craftsperson - Network Maintenance Craftsperson (Electrical & Instrumentation)

Engineering and manufacturing

Level 3 - Technical Occupation

Building, maintaining and repairing parts for the country's gas network, to provide a reliable supply of gas to domestic, commercial and industrial users.

Print to PDF View occupation in map

Reference: OCC0205B

Status: assignment_turned_inApproved occupation

Average (median) salary: £42,362 per year

SOC 2020 code: 2129 Engineering professionals n.e.c.

SOC 2020 sub unit groups:

  • 2129/07 Gas engineers (professional)
  • 5315/00 Plumbers and heating and ventilation installers and repairers

Technical Education Products

ST0205:

Gas network craftsperson - Network Maintenance Craftsperson (Electrical & Instrumentation)

(Level 3)

Approved for delivery

Employers involved in creating the standard:

Scotia Gas Networks, National Grid, Northern Gas Networks, L&G Utilities Ltd, Leven Energy Services, DCD, Utilergy, CMW Utilities Ltd, Butler Construction Ltd, SSE, Morrison Utility Services, Forefront Utilities

Summary

The United Kingdom’s gas network consists of approximately 286,000 kilometres (175,00 miles) of pipeline that supplies natural gas from on shore terminals through to 21.5 million gas users. Natural gas is a hazardous substance. The safe operation, control and maintenance of the gas network is essential to avert major loss or interruption to supplies, this includes responding to and managing gas emergency situations to ensure potential safety issues are controlled and remediated without delay. This is the basis of the Gas Network Craftsperson’s occupation. Gas Network Craftsperson’s are employed by organisations authorised to transport gas throughout the United Kingdom. These organisations vary from very large companies who own and operate networks that supply towns and cities across a wide geographical area, through to small companies who own independent networks that supply small housing developments with as few as 3 or 4 properties. They could be directly employed by the organisation that owns and/or manages the gas network or by an organisation that contracts their services to the networks. They work as part of a larger team, which may include planners, designers, supervisors and managers. They are often deployed to site in pairs or alone, dependent on the activity being undertaken. Good communication skills are essential as the may have to interact with the general public, agencies and emergency services on safety related matters and also provide technical advice to other stakeholders. The projects worked on could have values in excess of £250,000.

Employers involved in creating the standard:

Scotia Gas Networks, National Grid, Northern Gas Networks, L&G Utilities Ltd, Leven Energy Services, DCD, Utilergy, CMW Utilities Ltd, Butler Construction Ltd, SSE, Morrison Utility Services, Forefront Utilities

eco

Mid Green occupation

Typical job titles include:

Emergency response craftspersons
Network Maintenance craftsperson

Keywords:

Gas Safe
Installation
Maintenance
Pressure Management
Utilities
Utility Services

Knowledge, skills and behaviours (KSBs)

K1: Company testing and commissioning procedures needed to establish the condition of gas assets, equipment, network infrastructure and the actions needed as a result of the tests. This includes both practical applications and the use of diagnostic techniques and IT systems
K2: The requirements of the Gas Safety (Management) Regulations as relevant to their role, this being supported through company specific procedures involved in the practical installation and maintenance of gas network assets
K3: The requirements of Health and safety standards and regulations, and environmental and regulatory requirements, including; The Health and Safety at Work Act Dangerous Substances Explosive Atmospheres Regulations, The ATEX Directives, The Management of Health and Safety regulations, PUWER, Working at Height Regulations, Confined spaces Regulations, COSHH, PPE Regulations, RIDDOR, Noise at work regulations, Control of Asbestos regulations and the Manual Handling Operations Regulations.
K4: Company maintenance practices, processes and procedures associated with gas network systems, controls and equipment
K5: Gas engineering and mechanical or electric principles and processes that underpin the location, diagnosis and rectification of faults
K6: Company policies, procedures and engineering instructions as specified by the employer
K7: The safety processes to be applied when testing for voltages across the range likely to be encountered
K8: The permitry requirements when maintaining or configuring telemetry systems or undertaking works that may initiate system alarms
K9: Recognise the processes to be followed in order to identify and resolve data quality and calibration issues
K10: Understand how to test and calibrate instrumentation and control equipment in accordance with company specific procedures
K11: The theories used to maintain, test and calibrate electrical equipment in line with company specific procedures
K12: Understand how to safely apply diagnostic fault finding principles to electrical systems
K13: Identify relevant, company specific procedures and know how to access such documentation
K14: Legislative requirements affecting electrical works and be able to describe how such legislation may affect them
K15: The hazards that could be encountered when maintaining both fixed and portable electrical equipment
K16: Understand why safe isolation procedures must be followed when carrying out electrical or instrumentation operations

S1: Undertake and document risk assessments in accordance with company procedures
S2: Comply with workplace health, safety & environmental practices and regulations, maintaining a safe and secure working environment
S3: Follow engineering instructions and company procedures to complete tasks safely and on-time
S4: Undertake inspection and examination of network assets in order to maintain the safe and compliant operation of the network to ensure the integrity, safety and security of supply
S5: Maintain and/or install gas engineering assets, components and associated equipment
S6: Install, test, purge and commission gas network assets
S7: Operate powered tools and equipment, such as drills, angle grinders, brush cutters and shot blasting equipment as required for network maintenance operations.
S8: Use approved gas detection equipment to ensure safe environment
S9: Use Personal Protective Equipment (PPE) and safety equipment in accordance with manufacturer’s instructions and employer policy
S10: Obtain and analyse asset condition and performance information to facilitate decision making
S11: Identify, organise and use resources effectively to complete tasks, with consideration for cost, quality, safety, security and environmental impact
S12: Through risk assessment, minimise risks to life, property and the environment when undertaking work activities
S13: Accurately record job information, complete job reports and process
S14: Liaise with gas consumers, statutory agencies and members of the public in order to ensure their safety
S15: Accurately update company systems with details of work undertaken
S16: Apply electrical theories and principles and use equipment to carry out diagnostic fault finding procedures
S17: Inspect, maintain, repair, overhaul test and calibrate instrumentation and control equipment and circuits in accordance with company procedures
S18: Maintain site lighting and fixed and portable equipment which may include generators, batteries and associated equipment
S19: Carry out cable testing across a range of voltages to ensure safety and suitability for use
S20: Install, maintain and dismantle instruments, controllers, probes, attachments, cabling, meters and display units
S21: Configure telemetry outstation and internal systems
S22: Identify and resolve data quality and calibration issues
S23: Test, calibrate and validate fixed and portable analogue and digital instrumentation using approved procedures and standards
S24: Repair, maintain, configure and calibrate field instrumentation, communication devices and associated equipment used in system and process control
S25: Use standards and specifications to improve the information gathered by telemetry data
S26: Inspect and maintain security equipment, telecommunication devices and alarm systems
S27: Carry out isolation procedures to ensure process or system stability and the safety of personnel when carrying out operations
S28: Provide support to day-to-day users of instrumentation and control systems
S29: Ensure consistent and valid data is available for business and regulation purposes
S30: Apply electrical skills to install, maintain and dismantle a wide range of plant, machinery and components

B1: Display a self-disciplined, self-motivated approach
B2: Deliver a polite, courteous professional service to all customers, stakeholders and members of the public as appropriate
B3: Demonstrate and apply a safety first approach
B4: Accept accountability when undertaking individual and team tasks
B5: Follows instruction from appropriate supervision, and makes decisions when required.
B6: Quality-focussed and professional in work and in personal standards
B7: Recognise personal limitations and seek advice from managers, experts and specialists when required
B8: Accepts responsibility for work undertaken
B9: Receptive to the needs and concerns of others, especially where related to diversity and equality
B10: Committed to carrying out and recording Continued Professional Development necessary to maintain and enhance competence
B11: Exercises responsibilities in an ethical manner
B12: Interacts with people and approaches work activities in a way that contributes to continuous self improvement

Occupational Progression

This occupational progression map shows technical occupations that have transferable knowledge and skills.

In this map, the focused occupation is highlighted in yellow. The arrows indicate where transferable knowledge and skills exist between two occupations. This map shows some of the strongest progression links between the focused occupation and other occupations.

It is anticipated that individuals would be required to undertake further learning or training to progress to and from occupations. To find out more about an occupation featured in the progression map, including the learning options available, click the occupation.

Progression decisions have been reached by comparing the knowledge and skills statements between occupational standards, combined with individualised learner movement data.

Technical Occupations

Levels 2-3

Higher Technical Occupations

Levels 4-5

Professional Occupations

Levels 6-7

Progression link into focused occupation.
assignment_turned_in

Level 2

eco
This is the focused occupation.
assignment_turned_in

Level 3

eco
Progression link from focused occupation.
assignment_turned_in

Level 3

eco

Construction and the built environment

Engineering and manufacturing