Potential occupational standard
Occupational standard in development
Approved occupational standard
Occupational standard without apprenticeship
Custom occupational card
Apprenticeship
T Level
Technical Qualification
Higher Technical Qualification
Career starter apprenticeship
Royal apprenticeship
Occupational progression
Technical education progression
Mid green occupation
Dark green occupation
Favourite occupation
home Engineering and manufacturing
Gas network craftsperson - Network Pipelines Maintenance Craftsperson

Gas network craftsperson - Network Pipelines Maintenance Craftsperson

Engineering and manufacturing

Level 3 - Technical Occupation

Building, maintaining and repairing parts for the country's gas network, to provide a reliable supply of gas to domestic, commercial and industrial users.

Reference: OCC0205D

Status: assignment_turned_inApproved occupation

Average (median) salary: £38,099 per year

SOC 2020 code: 5315 Plumbers & heating and ventilating installers and repairers

SOC 2020 sub unit groups:

  • 5315/00 Plumbers and heating and ventilation installers and repairers
  • 2129/07 Gas engineers (professional)
  • 5214/00 Pipe fitters

Technical Education Products

Employers involved in creating the standard:

Scotia Gas Networks, National Grid, Northern Gas Networks, L&G Utilities Ltd, Leven Energy Services, DCD, Utilergy, CMW Utilities Ltd, Butler Construction Ltd, SSE, Morrison Utility Services, Forefront Utilities

Summary

The United Kingdom’s gas network consists of approximately 286,000 kilometres (175,00 miles) of pipeline that supplies natural gas from on shore terminals through to 21.5 million gas users. Natural gas is a hazardous substance. The safe operation, control and maintenance of the gas network is essential to avert major loss or interruption to supplies, this includes responding to and managing gas emergency situations to ensure potential safety issues are controlled and remediated without delay. This is the basis of the Gas Network Craftsperson’s occupation. Gas Network Craftsperson’s are employed by organisations authorised to transport gas throughout the United Kingdom. These organisations vary from very large companies who own and operate networks that supply towns and cities across a wide geographical area, through to small companies who own independent networks that supply small housing developments with as few as 3 or 4 properties. They could be directly employed by the organisation that owns and/or manages the gas network or by an organisation that contracts their services to the networks. They work as part of a larger team, which may include planners, designers, supervisors and managers. They are often deployed to site in pairs or alone, dependent on the activity being undertaken. Good communication skills are essential as the may have to interact with the general public, agencies and emergency services on safety related matters and also provide technical advice to other stakeholders. The projects worked on could have values in excess of £250,000.

Employers involved in creating the standard:

Scotia Gas Networks, National Grid, Northern Gas Networks, L&G Utilities Ltd, Leven Energy Services, DCD, Utilergy, CMW Utilities Ltd, Butler Construction Ltd, SSE, Morrison Utility Services, Forefront Utilities

Typical job titles include:

Emergency response craftspersons
Network Maintenance craftsperson

Keywords:

Gas Safe
Installation
Maintenance
Pressure Management
Utilities
Utility Services

Knowledge, skills and behaviours (KSBs)

K1: Company testing and commissioning procedures needed to establish the condition of gas assets, equipment, network infrastructure and the actions needed as a result of the tests. This includes both practical applications and the use of diagnostic techniques and IT systems
K2: The requirements of the Gas Safety (Management) Regulations as relevant to their role, this being supported through company specific procedures involved in the practical installation and maintenance of gas network assets
K3: The requirements of Health and safety standards and regulations, and environmental and regulatory requirements, including; The Health and Safety at Work Act Dangerous Substances Explosive Atmospheres Regulations, The ATEX Directives, The Management of Health and Safety regulations, PUWER, Working at Height Regulations, Confined spaces Regulations, COSHH, PPE Regulations, RIDDOR, Noise at work regulations, Control of Asbestos regulations and the Manual Handling Operations Regulations.
K4: Company maintenance practices, processes and procedures associated with gas network systems, controls and equipment
K5: Gas engineering and mechanical or electric principles and processes that underpin the location, diagnosis and rectification of faults
K6: Company policies, procedures and engineering instructions as specified by the employer
K27: The health and safety requirements when conducting operations on gas pipeline systems
K28: Understand how to test and confirm the suitability and effectiveness of corrosion control measures
K29: The requirements for the testing and inspection of pipelines in accordance with the Pipeline safety and Pressure systems safety regulations
K30: The permitry requirements when entering or working on gas operational sites
K31: The company specific requirements for the inspection of pipeline systems and associated systems and equipment, including the frequency of such inspection
K32: The implications of and assessment of damage sustained to pipelines by third party persons
K33: The hazards and permitry requirements associated with working on or in proximity of pipelines that contain pressurised gas
K34: The implications of the pressure systems safety regulations when assessing the suitability of equipment to be used
K35: Understand how to apply company specific procedures when responding to reported pipeline gas emergencies
K36: The New Roads and Street Works Act requirements for the provision of signing, lighting and guarding when working in or adjacent to the public highways

S1: Undertake and document risk assessments in accordance with company procedures
S2: Comply with workplace health, safety & environmental practices and regulations, maintaining a safe and secure working environment
S3: Follow engineering instructions and company procedures to complete tasks safely and on-time
S4: Undertake inspection and examination of network assets in order to maintain the safe and compliant operation of the network to ensure the integrity, safety and security of supply
S5: Maintain and/or install gas engineering assets, components and associated equipment
S6: Install, test, purge and commission gas network assets
S7: Operate powered tools and equipment, such as drills, angle grinders, brush cutters and shot blasting equipment as required for network maintenance operations.
S8: Use approved gas detection equipment to ensure safe environment
S9: Use Personal Protective Equipment (PPE) and safety equipment in accordance with manufacturer’s instructions and employer policy
S10: Obtain and analyse asset condition and performance information to facilitate decision making
S11: Identify, organise and use resources effectively to complete tasks, with consideration for cost, quality, safety, security and environmental impact
S12: Through risk assessment, minimise risks to life, property and the environment when undertaking work activities
S13: Accurately record job information, complete job reports and process
S14: Liaise with gas consumers, statutory agencies and members of the public in order to ensure their safety
S15: Accurately update company systems with details of work undertaken
S48: Apply non-destructive testing theories and principles in order to carry out diagnostic fault finding procedures
S49: Apply the theories and principles of integrity testing, purging commissioning and de-commission of gas pipelines and associated equipment and components
S50: Inspect, monitor, maintain, dismantle, install and repair pipeline systems and equipment for example; flow regulators, safety devices, system protection devices, measurement devices and monitoring equipment
S51: Remove, repair and replace components of gas transportation pipelines and associated equipment
S52: Undertake corrosion prevention activities i.e. cathodic protection systems and monitoring, coating and wrapping
S53: Take action to prevent third parties causing damage to gas transportation pipeline assets and equipment i.e. tracing, marking, monitoring third party activities and responding to encroachments
S54: Liaise with relevant land owners and third parties e.g. statutory agencies and members of the public
S55: Consult design specifications to analyse and calculate pipeline system parameters and rectification procedures
S56: Interpret plans and drawings to install, position or re-locate pipeline equipment and components
S57: Test, service and repair pipeline equipment as part of planned preventative maintenance and/or reactive maintenance programmes
S58: Operate specialised tools and equipment for pipeline maintenance operations for example; in line inspection tools, damage assessment, intelligent pigging, valve repairs, flow stopping and under pressure drilling.
S59: Locate and avoid underground plant and equipment prior to and whilst undertaking activities
S60: Install signing, lighting and guarding systems
S62: Organise additional resources to facilitate repairs as required
S63: Respond to reported pipeline gas emergencies

B1: Display a self-disciplined, self-motivated approach
B2: Deliver a polite, courteous professional service to all customers, stakeholders and members of the public as appropriate
B3: Demonstrate and apply a safety first approach
B4: Accept accountability when undertaking individual and team tasks
B5: Follows instruction from appropriate supervision, and makes decisions when required.
B6: Quality-focussed and professional in work and in personal standards
B7: Recognise personal limitations and seek advice from managers, experts and specialists when required
B8: Accepts responsibility for work undertaken
B9: Receptive to the needs and concerns of others, especially where related to diversity and equality
B10: Committed to carrying out and recording Continued Professional Development necessary to maintain and enhance competence
B11: Exercises responsibilities in an ethical manner
B12: Interacts with people and approaches work activities in a way that contributes to continuous self improvement

Occupational Progression

This occupational progression map shows technical occupations that have transferable knowledge and skills.

In this map, the focused occupation is highlighted in yellow. The arrows indicate where transferable knowledge and skills exist between two occupations. This map shows some of the strongest progression links between the focused occupation and other occupations.

It is anticipated that individuals would be required to undertake further learning or training to progress to and from occupations. To find out more about an occupation featured in the progression map, including the learning options available, click the occupation.

Progression decisions have been reached by comparing the knowledge and skills statements between occupational standards, combined with individualised learner movement data.

Technical Occupations

Levels 2-3

Higher Technical Occupations

Levels 4-5

Professional Occupations

Levels 6-7

Progression link into focused occupation.
assignment_turned_in

Level 2

eco
This is the focused occupation.
assignment_turned_in

Level 3

Engineering and manufacturing